Sale!

Metal and Woodworking 14|CX Bandsaw

Original price was: 2 999,00 $.Current price is: 132,99 $.

SKU: SKUTVS0JU Categories: Bandsaws, Saws, Woodworking Machines Tag: Laguna Brand: Laguna

Description
Reviews (0)

The Laguna 14|CX Bandsaw is the ideal saw for craftsmen who work in both wood and metal. Patented disc brake stops the momentum almost instantaneously. Strong, smooth running BLDC motor makes the 14|CX stand out. Comes standard with a Laguna Bi-Metal ½” x 10/14 Variable TPI Blade.

The cast-iron wheels are balanced and provide plenty of inertia to drive the blade through the material being cut. The flywheels are supported by oversized shafts with sealed bearings.

The Laguna ceramic guides have a total of 10 contact points above and below the work piece for precise cuts. The ceramic inserts handle heat better than traditional metal bearings and are easily replaceable.

The foot brake system uses a larger brake disc to provide more stopping power to handle the higher speeds and additional inertia of the heavier pulleys.

The dual dust collection ports provide collection just under the table surface and lower guides as well as collection at the bottom of the cabinet to help keep the machine clean and ready for next use.

The table tilts both toward the inside and the outside of the saw to make accurate beveled cuts in a wide range of materials. This helps fit materials when welding metal or making woodworking joints.

The saw is fitted with clear windows to easily set blade tracking and blade tension.

The magnetic tensioning indicator is easy to adjust to help accurately set blade tension for all types of blades.

Blade tension is set by using the convenient handwheel. The blade tension quick-release handle de-tensions the blade when the saw is not in use.

The Hi/Low fence is easily changed from the High Position (used for resawing and most thicker materials) and the Low Position (used for thinner stock or when making thin cuts). The ability to change from High to Low position provides better hand positioning when feeding stock through the saw for certain types of cuts.

The worm-drive rack and pinion upper guidepost is easily positioned and locked in place to fit the size of the materials being cut.

The saw is equipped to accept the optional work lights with a rear power outlet and two pre-drilled mounting locations.

Features:

DRO – The digital readout provides a quick and easy reference for blade speeds. The DRO displays in “SFPM” (surface feet per minute). This is the speed that the teeth of the blade are moving. This number can be set by using a blade speed chart for the specific blade and material being used to achieve high quality cuts in a wide range of materials.

2 Speed Pulley – The 2-step pulley provides a mechanical High and Low range to keep the bandsaw in the correct torque range for the blade speed and materials being cut. The belt position should be set first and then the final speed should be set by turning the speed control knob. The pulleys use a poly-groove drive belt to prevent slipping even when cutting the toughest materials.

Speed Control Knob – The speed control knob can be used to change the speed on the fly if needed, meaning that you can increase or decrease speed during the cut to optimize the performance of the blade in the specific material being cut. It is conveniently located on the control panel adjacent to the DRO display.

PWM – Electronic speed control is provided by the PWM system (pulse width modulation) which uses an inverter to control the output to the powerful DC motor. This system has the added benefit of quickly stopping the motor and wheels when shut off.

Specifications:

Motor: HP 1-3/4 HP

Input Power: 110-120 Volt AC

Recommended Breaker: 20 Amp

Motor Input (inverter): 166 VDC

Throat: 13-5/8″ (346mm)

Table – Cast Iron: 16″ x 21-1/2″ (406.4 x 546mm)

Table Tilt: – 7 degrees + 45 degrees

Miter Slot: 3/8″ x 3/4″ (9.525 x 19.05mm)

Table Height: 38″ (965mm)

Blade Speed – High Range: 160 – 4400 FT/MIN

Blade Speed – Low Range: 60 – 1600 FT/MIN

Flywheels: Cast Iron

Resaw Capacity: 13″ (330.2mm)

Blade Length: 115″ (114-3/4″ Min – 116″ Max)

Maximum Blade Width: 3/4″ (19 mm)

Minimum blade width: 1/8″ (3 mm)*

Guides: Laguna Ceramic

Height: 70-1/2″ (1,790mm)

Machine Dimensions (L x W): 29-3/4″ x 28″ (755 x 712mm)

Base Footprint: 22-11/16″ x 17-9/16″ (576 x 446mm)

Weight: 258 lbs (117 kg)

Shipping Weight: 280 lbs (127 kg)

Package size (L x W x H): 73-1/8″ x 26-1/2″ x 24-5/16″

Included:

Comes standard with a Laguna Bi-Metal ½” x 10/14 Variable TPI Blade

What’s Included:

(1)Laguna Metal and Woodworking 14|CX Bandsaw

FAQs

What materials can the Laguna 14|CX cut, and how does it handle both wood and metal?

The 14|CX is designed primarily for woodworking but can also cut metal with the proper blade and speed adjustments. It handles wood exceptionally well and can manage light metal work when set up correctly.

Is this saw suitable for frequent metal cutting, or best for occasional use?

It’s best suited for occasional metal cutting rather than frequent use. For regular metal work, a dedicated metal-cutting bandsaw is recommended.

How powerful is the motor for resawing hardwoods and cutting thicker stock?

The motor provides strong power for resawing hardwoods and cutting thicker stock with ease. It’s well-equipped for demanding woodworking applications.

Reviews

There are no reviews yet.

Metal and Woodworking 14|CX Bandsaw

Reviews

Be the first to review “Metal and Woodworking 14|CX Bandsaw” Cancel reply

Related products

Login